The Different Parts For Pressure Washer: A Brief Outline

Parts for Pressure Washer

A pressure washer is an extremely useful modern invention but at times they do malfunction and you will be looking for parts for pressure washer. It is a high pressure mechanical sprayer which is used to wash multiple surfaces. Whether it is dirt, dust, mud, grime, mold, or loose paint, these devices can clean it all in a very short time. The advantage of this kind of a machine is that it can be used on almost any surface. The basic parts for pressure washer are: the motor, which can run electric or gasoline; a high-pressure water hose; and a trigger style switch for operation. The fundamental functionality of this device is very simple and similar to that of a garden hose. The washer pump adds its power to create high and velocity. Pressure washers can be classified as electric, diesel, hydraulic or gas, depending on the type of energy used by them to operate.  When looking for parts for pressure washer make sure to get the right part.

Basics of parts for pressure washer

A basic knowledge about the parts for pressure washer and accessories that make up a pressure washer is elemental in learning how to use them. There are several parts for pressure washer. Some of the parts for pressure washer that make up a typical pressure washer are: ball valves, carts and skids, chemical injectors, blower wheels, burners and heaters, filters, reels and hoses, relief valves, duct cleaners, electric switches, GFCI cords, gear boxes, gauges, pumps, oil burners, replacement belts, tires, transformer igniters, trigger guns, and unloader valves. Each of these has its own function and when put together with the others completes the functioning of the washer.Parts for Pressure Washer

One of the parts for pressure washer is the ball valve is a valve that allows you to temporarily stop the water flow through the pressure hose without shutting down the machine. This also helps the smooth transition from one attachment to the other. Most manufacturers offer a ball valve kit that can easily fit into any washer with up to 7250 PSI and 10 GPM. This part for pressure washer is typically priced under $50 and easy to replace on your own.

Pressure washer carts or skids can upgrade the look of any washer. The frames are available aluminum, powder coated steel, or stainless steel. The pump and engine can be mounted on top of these easily. These carts increase the maneuverability of the device and offer an increased resistance from chemicals and rust. They can be used with any type of washer detergent.

Another parts for pressure washer is the chemical injectors help you to inject cleaning solutions into the washer. When added in the correct concentration, these injectors help remove tough stains and dirt. The chemical injection rate can be increased or decreased simply by turning the valve clockwise or counterclockwise.

Blower wheels are also used in condensers, draft boosters, flue exhaust and other small appliances and furnaces. These are made with corrosion and rust resistant galvanized steel. You can choose between clockwise or counter-clockwise rotation depending on the device you have.

The burners and heaters are parts for pressure washer that attach to a cold water pressure washer and turn it into a hot water machine with high cleaning powers.When the gun is triggered, the burner fires up automatically. These are easy to operate and the units continuously heat as much as 6gpm up to 195°.

Of all the parts for pressure washer, washer filters are perhaps the most crucial ones when it comes to protecting the device. These filters are an easy and effective way to minimize that damage and significantly extend the operating life of your equipment. Easy to install and maintain, most of these filters feature cleanable metal screens that never need to be replaced.

Pressure washer hose reels make the hoses last longer and can save a lot of time. This part for pressure washer can be trailer mounted reels navigate to where you need the hose. Wall mounted reels can save some room on the ground. The hand carry models are light, but durable. The constant tension design keeps the reel from unspooling additional hose.

Pressure relief valves are designed to open automatically and reduce any significant system pressure overloads. These overloads can cause damages to the equipment and injure the operator. The easy start valve is a low pressure relief valve, which directs enough water into by-pass to reach a certain pressure.

Duct Cleaners are designed to clean ducts, trash chutes, vents, restaurant hoods, tanks and more. These are the perfect components for any pressure washer. These are made of corrosion-resistant materials and stainless steel self-lubricated bearings.

A GFCI is a ground fault circuit breaker. It is an inexpensive electrical device which is essential for the safety and protection of a pressure washer or any equipment. It can help prevent electrical fires.

A gear system needs to be installed to slow down the speed of the pump and achieve longer life of the bearings and seals. Gear Drive installation not only keeps the heat transfer down, but also makes the pump turn at half speed. This makes such machines run longer.

Pressure Gauges make it possible to monitor the pressure level in the system. Accurate gauges can warn of internal pump damage, cavitation, pressure spikes, and other problems. When selecting your pressure gauge, always allow at least 10% above the maximum capacity of the unit.

Tire assemblies are available in a variety of sizes and materials. The larger the tire the easier it will be to move around on uneven or rough surfaces. Some manufacturers also produce foam filled or puncture proof styles for lower maintenance needs.

Pressure washer trigger guns are available for both, commercial and residential users. All spray guns are equipped with the 1/4″ FNPT so that the wand pipe can be easily threaded into the gun. The inlet side of a gun fits any 3/8″ MNPT outlet where the pressure hose can be attached.

The unloader valve works as a safety device. It controls the water-flow direction. As soon as the spray gun is turned off, the unloader valve redirects the water back into the pump inlet. This in turn prevents the building up of extremely high pressures and safeguards against the failure of the component parts.

A detailed research on the parts for pressure washer can prove to be very helpful and beneficial before investing in the actual device.